| | | Advantages of using Storm-Tite® |
|
| | Storm-Tite® means better roof appearance... Visual proof of seal, unique domed washer flattens on contact with roof and molds to form leak proof seal Tested and passed by James Cook University Registered design - unique Flat-Head for increased corrosion protection Galvanised with C4 alloy -the best corrosion protection available today Less money tied up in stock, one screw fits most profiles Easier & Faster! No need to align a separate washer, Roofer holds more screws during installation Available in T17 (Timber) Steel drilling & Dual point.
|
| 
| 
| 
| 
| 
|
|
| | | | | | | Latest Sizes for Storm-Tite | | | Points | | | | | | | | | | | | | | Steel | 25mm | 50mm | 70mm | 80mm | 100mm | 125mm | | 150mm | | 175mm | 200mm | 250mm | | | 1" | 2" | 2¾" | 3¼" | 4" | 5" | | 6" | | 7" | 8" | 10" | | | | | | | | | | | | | | | | Timber T17 | 38mm | 50mm | 65mm | 75mm | 100mm | 125mm | 135mm | 150mm | | | 200mm | 250mm | 300mm | | 1½" | 2" | 2½" | 3" | 4" | 5" | 5½" | 6" | | | 8" | 10" | 12" | | | | | | | | | | | | | | | | Dual Point | | | 65mm | | | 125mm | | 150mm | 160mm | 175mm | 200mm | | | | | | | 2½" | | | 5" | | 6" | 6½" | 7" | 8" | | | | | | | | | | | | | | | | | | Series 500 | | | | | | 125mm | | 150mm | | | 200mm | 225mm | | | | | | | | | 5" | | 6" | | | 8" | 9" | | | | | | | | | | | | | | | | |
| | | Use ⅜" Or 10mm Hex Driver with Storm-Tite | | | | | | | | | | For a leak proof seal.... | | | | | Storm-Tite It's that simple it just doesn't leak | | | | | | | | | Quick Search | Download Storm-Tite Brochure | | | | | | |
|
| | One piece metal assembly with 25mm diameter metal flange for maximum holding power EPDM domed Deks cut washer guaranteed for 20 years only the best will do! No shank protection system required! Registered design Unique Flat-Head for increased corrosion protection EPDM domed Deks washers black & grey Galvanised with C4 alloy the best corrosion protection available Hollymetal AS3566 -Class 4
| 
| 
|
|
| | |
| | |
| | Disadvantages of traditional fasteners A different shaped fastener is required for each roofing profile Debris could lodge under the plate and predispose the fastener to corrosion Time is wasted lining up the washer whilst drilling and holding the fastener straight The shape and height of the traditional cyclonic assembly doesn't add to the aesthetics of the roof Possible call backs because of leaks If the screw is installed off-centre the potential for leakage is high
| Traditional fasteners used in cyclonic areas | 
| 
| 
|  |  | A different fastener required for each roofing profile! |
|
| | |
